OptoIndex – News and more

Trioptics presents new "OptiSpheric® IOL R&D".
05 April 2018, 11:05 am – OptoIndex

IOL manufacturers are continuously developing new lens models to meet the latest technological standards. TRIOPTICS now offers the perfect solution for putting these new products to the acid test in compliance with ISO 11979: the new OptiSpheric® IOL R&D.

Especially designed for research and development, the OptiSpheric® IOL R&D impresses with its flexibility. The device can be used to measure and test important parameters of all modern lens designs (monofocal, multifocal, trifocal, toric, aspheric and those with extended depth of focus (EDOF) – whether diffractive, refractive, or sectors), such as refractive power, modulation transfer function and MTF focus scan, orientation and orthogonality of the cylinder axis of toric lenses, radius of curvature, and back focal length. The manufacturing quality can also be visually assessed via the built-in camera. “The design of the device meets all the requirements of ISO 11979 – including an integrated real cornea,” emphasizes product manager Dörte Zimmermann. “Therefore, all evaluations of the newly developed IOL can be conducted in compliance with the standards.”

Especially designed for research and development, the OptiSpheric® IOL R&D impresses with its flexibility. The device can be used to measure and test important parameters of all modern lens designs (monofocal, multifocal, trifocal, toric, aspheric and those with extended depth of focus (EDOF) – whether diffractive, refractive, or sectors), such as refractive power, modulation transfer function and MTF focus scan, orientation and orthogonality of the cylinder axis of toric lenses, radius of curvature, and back focal length. The manufacturing quality can also be visually assessed via the built-in camera. “The design of the device meets all the requirements of ISO 11979 – including an integrated real cornea,” emphasizes product manager Dörte Zimmermann. “Therefore, all evaluations of the newly developed IOL can be conducted in compliance with the standards.”

To ensure that the lenses also meet the real-world requirements for the patient’s eye, the OptiSpheric® IOL R&D offers flexibility in the use of various corneas and filters. “Both spherically aberrated corneas and lighting filters for 644 nm, 546 nm, 480 nm and photopic illumination simulate real imaging conditions,” Zimmermann says. The perfect positioning is not always achieved during the implantation of the lenses. The effects of such relevant, practice-oriented displacements and tilting can be simulated with the Model Eye R&D. The results can help to optimize the lens design, even in the case of incorrect positioning.

Since both the measurement method and the software are based on the OptiSpheric® IOL PRO 2 system, the results for the pass/fail analysis and the necessary measurement processes can be easily transferred from development to the quality control of the series production. This facilitates the initial evaluation processes in production and ensures the comparability of all results.